Black ID & Credit Card Wallet Key Holder*
The Black ID & Credit Card Wallet Key Holder is built for the part of the day nobody plans for: the door that needs a badge, the elevator that needs a scan, the parking gate, the coffee card, the keys buried at the bottom of a bag. It features 2 card slots on the back and a side loading ID window panel in the front, which makes scanning or showing your badge or access card quick and easy, and the metal ring can be used as a traditional key holder or as a lanyard attachment.
That combination is the whole point. The ID panel loads from the side, so the badge slides in and out without bending it, and it stays readable through the window while it is still attached to the ring. The 2 card slots on the back take the cards you reach for most, and at 3"W x 4"L the whole thing sits flat in a pocket or clips onto a lanyard instead of adding one more thing to carry.
Personalized in-house by HansonEllis, in business since 1999, it takes up to two lines of your own wording, 12 characters per line. A name turns an anonymous black badge holder into theirs, which matters in an office where twenty people carry the same one. A short line like "Tap In" over "Tap Out" gives it some personality, and a monogram keeps it quiet and professional.
It suits the first-day-of-a-new-job gift, the graduate starting an internship, the nurse or teacher who wears a badge every shift, the college student juggling a dorm key and a meal card, and the whole team on an onboarding list. It is also a practical groomsman or Father's Day gift for the man who says he does not need anything, because he will use it before the week is out.
Add your personalization above, choose your quantity, and give somebody back the thirty seconds they lose at every door.
ID & Credit Card Wallet Key Holder
Size: 3"W x 4"L
Item# ill+ton
Black ID & Credit Card Wallet Key Holder at a glance
The Black ID & Credit Card Wallet Key Holder is a 3"W x 4"L black badge and card holder with 2 card slots on the back, a side loading ID window panel in the front, and a metal ring that works as a traditional key holder or a lanyard attachment. The window makes scanning or showing a badge or access card quick and easy. It is personalized in-house by HansonEllis with up to 2 lines of 12 characters each.
Best for: anyone who badges in to work or campus every day and wants their ID, two cards and their keys personalized on one 3"W x 4"L holder.
Who the Black ID & Credit Card Wallet Key Holder is for
- New job and onboarding gifts a name on the badge holder someone will use from their first morning at the door.
- Corporate and client gifts a practical branded-feeling piece for a whole team, with each person's name on their own.
- Graduation for the graduate starting an internship or first role with a badge, a key and a card to carry.
- Father's Day for the dad who insists he needs nothing and then uses it every single day.
- Birthdays a small, genuinely useful gift with a name or a monogram on it.
- Groomsmen a rehearsal dinner thank you the guys will still be carrying long after the wedding.
- Retirement and service awards a name and a year of service on the holder that carried the badge for all those years.
- Christmas a stocking-sized gift for commuters, nurses, teachers and anyone who scans in to work.
- Housewarming the metal ring takes the new house keys, with the new address year on the second line.
- Best friend an inside joke in 12 characters for the friend who loses their keys weekly.
Black ID & Credit Card Wallet Key Holder size and materials
| Size | 3"W x 4"L |
|---|---|
| Material | Not stated on this listing; the holder is black with a metal ring. Email [email protected] if you need the material confirmed. |
| What is included | One ID and credit card wallet key holder with 2 card slots on the back, a side loading ID window panel in the front, and a metal ring |
| Personalization | Personalized in-house with up to 2 lines, 12 characters per line (24 characters in total) |
| Turnaround | Standard 5–10 business days, rush 3–5, expedite 1–3, plus 2–5 days US shipping |
| Personalized by | HansonEllis, in-house, in business since 1999 |
Care and use
- The ID window panel loads from the side, so a badge slides in and out without being bent around the frame.
- The metal ring is designed to take keys or to attach to a lanyard.
How the Black ID & Credit Card Wallet Key Holder is personalized
- Type your personalization into the field on this page: up to 2 lines with a maximum of 12 characters on each line.
- Set your quantity, whether that is one gift or one for every person on an onboarding list.
- HansonEllis personalizes each holder in-house and ships your order insured by UPS, FedEx or USPS with tracking emailed to you.
Ideas for what to put on it
- A first and last name, split across the two lines, so nobody picks up the wrong badge holder.
- A name on line one and a department, role or shift on line two.
- A three-letter monogram for someone who would rather keep it discreet.
- "Tap In" over "Tap Out" for a bit of personality on a work badge.
- A company name on one line and a start year or service milestone on the other.
Quote ideas for your Black ID & Credit Card Wallet Key Holder
- Badge & Keys
- Tap In / Tap Out
- M. Delgado
- Class of / 2027
- Welcome / Aboard
- Nurse Jen
- Keys to the / Kingdom
- Congrats / New Job
- Dad's Keys
- Team Bennett
Which one should I choose
Shoppers usually land here deciding between carrying a badge, cards and keys separately or putting all three in one personalized holder.
| Black ID & Credit Card Wallet Key Holder | Choose it when the badge, a couple of cards and the keys all need to travel together and be scanned without unclipping anything. |
|---|---|
| A plain issued badge holder | Choose it only if you do not mind everyone on the floor carrying an identical one with no name on it and no key ring. |
| A personalized money clip or card holder | Choose that when the cards matter more than the badge; it will not carry an ID in a front window or take a key ring. |
If the day involves a badge reader and a set of keys, the Black ID & Credit Card Wallet Key Holder replaces two things with one personalized one.
Ordering the Black ID & Credit Card Wallet Key Holder for weddings and events
Ordering the Black ID & Credit Card Wallet Key Holder for a company rollout, an onboarding group or a wedding party is straightforward. There is no minimum, so order the number you need, from one gift to a whole department. If each holder should carry a different name, order the full quantity and email your list to [email protected] after ordering so it can be matched to your order; keep each line to 12 characters. Company logos are handled as a custom order: send a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected], where a logo setup fee applies and not every logo can be reproduced. Standard production is 5–10 business days, rush 3–5 and expedite 1–3, plus 2–5 days US shipping; for a wedding, order 3–6 months ahead. For bulk pricing, please contact [email protected].
Questions shoppers ask about the Black ID & Credit Card Wallet Key Holder
How big is the Black ID & Credit Card Wallet Key Holder?
It is 3"W x 4"L, sized to hold a standard badge or access card and sit flat in a pocket or on a lanyard.
How many cards does it hold?
There are 2 card slots on the back, plus the side loading ID window panel in the front for a badge or access card.
Do I have to take the badge out to scan it?
No. The side loading ID window panel is designed to make scanning or showing your badge or access card quick and easy.
Can it be used as a key ring or on a lanyard?
Both. The metal ring can be used as a traditional key holder or as a lanyard attachment.
How much text can I personalize it with?
Up to 2 lines with a maximum of 12 characters per line, which is 24 characters in total. A first name, a last name, a monogram or a short two-word line all fit.
How is it personalized?
It is personalized in-house by HansonEllis. Type your wording into the personalization field on this page before you check out.
Can every holder in a team order have a different name?
Yes. Order the quantity you need, then email your list of names to [email protected] after ordering so it can be matched to your order.
Can I add our company logo?
Logos are handled as a custom order. Email a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected]; a logo setup fee applies and not every logo can be reproduced at this size.
Can I see a proof first?
Yes. Proofs are optional and available on request for a $35-55 service fee per proof, and a proof adds extra days to production. Changes after a proof has been sent carry a $40 minimum updating fee, so check your spelling before ordering.
Is there a minimum order?
No. Order a single holder as a gift or one for an entire department. For bulk pricing, please contact [email protected].
How long does an order take to arrive?
Standard production is 5 to 10 business days, then 2 to 5 days US shipping. Rush (3 to 5 days) and expedite (1 to 3 days) production are available, and international shipping is by request through [email protected].
Can I return it?
Personalized items are made to order and are final sale unless defective. Non-personalized items can be returned within 14 days.
See more in ACCESSORIES.
Updated September 2026 by the HansonEllis personalization team.
Average Customer Review: Not yet rated
| |
|
|
Recently Viewed Products |