Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure*
The Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure is made for the drive to work, the walk across campus and the shift that starts before sunrise. Its exclusive carbon fiber design gives the 16oz body a modern, textured surface that looks at home on a desk, a dashboard or a job site, and the double-wall construction using stainless steel does the quiet work of holding on to whatever temperature you poured in. It is stainless steel with a stainless steel liner, so there is no plastic taste between you and the first sip of the morning.
The low-profile stainless steel lid closes with a plastic thumb-slide, which means one thumb opens it and one thumb shuts it again. No twisting, no juggling, no lid set down on a counter and forgotten. Underneath, a rubberized skid-proof bottom grips the desk, the tailgate and the conference table instead of sliding across them, and at 6.75" H the tumbler fits all standard car cup holders, so it rides along instead of rolling around.
Then comes the part that turns it into a gift. Add a name, a nickname, a team, a graduation year or a short line of encouragement, and the tumbler stops being one more travel mug in the break room and becomes the one everyone recognizes on sight. The personalization is done in-house by HansonEllis, which has been personalizing gifts since 1999, so the lettering is placed the same way on the first tumbler and the fiftieth.
That makes it an easy gift for the people who are always on the move: a dad who leaves before the house wakes up, a graduate heading to a first apartment, a coach, a crew, a nursing unit, a whole office at the end of a good year. Order one, or order a matching row of them with a different name on each.
Add your personalization text above, choose your quantity, and give a gift that gets used every single day.
Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure
Size: 6.75" H
Double Wall Stainless Steel
16oz
Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure at a glance
The Personalized Skid-Proof Double Wall Stainless Steel Tumbler is a 16oz travel tumbler, 6.75" H, with an exclusive carbon fiber design, double-wall stainless steel construction and a stainless steel liner. A low-profile stainless steel lid with a plastic thumb-slide closure opens with one thumb, a rubberized skid-proof bottom keeps it from sliding, and it fits all standard car cup holders. It is personalized in-house by HansonEllis with up to two lines of 16 characters. There is no minimum order.
Best for: commuters, crews and gift-givers who want a 16oz double-wall stainless steel travel tumbler with a one-thumb lid and a name on it.
Who the Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure is for
- Father's Day his name or "Dad's Road Cup" on the tumbler that rides in the truck all year.
- Graduation a name and the class year for the graduate packing a first apartment or a first commute.
- Groomsmen gifts one per groomsman with his name, so the getting-ready photos come with coffee in hand.
- Corporate and client gifts a personalized 16oz tumbler for every team member or client, ordered with different names on each.
- Christmas a stocking gift for the commuters, the early risers and the coffee people on your list.
- Birthdays a milestone year and a name on a tumbler that gets used long after the cake is gone.
- Retirement a last name and the years of service for the colleague who finally gets to drink coffee slowly.
- Best friend an inside joke or a shared nickname on a tumbler that sits on her desk every day.
- Mother's Day her name on a 16oz tumbler that survives the school run, the car pool and the soccer field.
- Housewarming a family name for new neighbors who are still unpacking and living on coffee.
Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure size and materials
| Size | 6.75" H, 16oz capacity; fits all standard car cup holders |
|---|---|
| Material | Double-wall stainless steel with a stainless steel liner, exclusive carbon fiber design, rubberized skid-proof bottom; low-profile stainless steel lid with a plastic thumb-slide closure |
| What is included | One 16oz tumbler with its low-profile stainless steel lid and thumb-slide closure |
| Personalization | Personalized in-house with up to 2 lines of 16 characters each, 32 characters in total |
| Turnaround | Standard 5–10 business days, rush 3–5, expedite 1–3, plus 2–5 days US shipping |
| Personalized by | HansonEllis, in-house, in business since 1999 |
Care and use
- Double-wall stainless steel with a stainless steel liner; the thumb-slide closure on the lid is plastic.
- The rubberized skid-proof bottom is made to grip flat surfaces, and the 6.75" H body fits all standard car cup holders.
How the Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure is personalized
- Type the name, initials or short message you want on the tumbler into the personalization field on this page, up to 16 characters on each of two lines.
- Set your quantity: one tumbler as a gift, or a full run for a team, an office or a wedding party.
- HansonEllis personalizes each tumbler in-house and ships it insured by UPS, FedEx or USPS, with tracking emailed to you.
Personalization ideas for your tumbler
- A first and last name for a colleague, so no tumbler in the break room is ever mixed up again.
- A name plus the graduation year for a high school or college graduate.
- A team or department name on the top line and the year on the second line.
- A nickname the family actually uses, such as "Papa" or "Coach".
- Two initials and a wedding date for a newly married couple who share the commute.
Quote ideas for your Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure
- But First, / Coffee
- Fuel Up, Show Up
- Dad's Road Cup
- Emma Carter / Class of 2027
- Team Sanders / Est. 2026
- Hustle & Hydrate
- Thanks, Coach / 2026 Season
- Mia & Noah / 06.12.27
- Nurse Julia R.
- Early Bird / Gets Coffee
Which one should I choose
Shoppers usually weigh this tumbler against the plain drinkware already sitting in the cupboard or the office kitchen.
| Personalized Skid-Proof Double Wall Stainless Steel Tumbler | Choose it when the gift has to travel: 16oz, double-wall stainless steel, a one-thumb slide lid, a skid-proof base and a name personalized in-house. |
|---|---|
| A plain, unpersonalized stainless tumbler | Choose it only when the tumbler is for yourself and you do not mind it looking identical to every other one in the break room. |
| A ceramic office mug | Choose it when the drink never leaves the desk; it will not close, will not fit a cup holder and will not survive the commute. |
For a gift that gets carried every day and never gets mixed up with someone else's, the personalized 16oz stainless steel tumbler is the pick.
Ordering the Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure for weddings and events
Ordering the Personalized Skid-Proof Double Wall Stainless Steel Tumbler for a wedding party, a conference or a company thank-you is straightforward. There is no minimum, so order exactly the quantity you need, from one groomsman's tumbler to a full staff run. If each tumbler should carry a different name, order the full quantity and then email your list of names to [email protected] so it can be matched to your order. Company logos are handled as a custom order: send a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected], where a logo setup fee applies and not every logo can be reproduced. Standard production is 5–10 business days, rush 3–5 and expedite 1–3, plus 2–5 days US shipping; for a wedding, order 3–6 months ahead. For bulk pricing, please contact [email protected].
Questions shoppers ask about the Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure
How big is the Personalized Stainless Steel Tumbler and how much does it hold?
It is 6.75" H and holds 16oz. That is a full travel-mug size rather than a small cup, and it still fits all standard car cup holders.
Will this tumbler fit in a car cup holder?
Yes. The tumbler is designed to fit all standard car cup holders, so it can ride along on the commute instead of sitting loose in the console.
What is the tumbler made of?
It is double-wall stainless steel with a stainless steel liner and an exclusive carbon fiber design on the outside. The bottom is rubberized and skid-proof, and the thumb-slide closure on the lid is plastic.
How does the lid and thumb-slide closure work?
The lid is low-profile stainless steel with a plastic thumb-slide closure, so you can slide it open and closed with one thumb while you are driving or carrying something in your other hand.
How is the tumbler personalized, and how many characters fit?
It is personalized in-house by HansonEllis. Type your text into the personalization field on this page: up to 2 lines with a maximum of 16 characters per line, 32 characters in total, spaces and punctuation included.
Can I put a company logo on the tumbler?
Yes, by custom order. Email your logo as a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected]. A logo setup fee applies, and not every logo can be reproduced.
Can each tumbler have a different name on it?
Yes. Order the full quantity you need, then email your list of names to [email protected] after ordering so it can be matched to your order.
Can I see a proof before the tumblers are personalized?
Yes. Proofs are optional and available on request for a $35-55 service fee per proof, and a proof adds extra days to production. Changes after a proof has been sent carry a $40 minimum updating fee, so please check your text before ordering. Ask in the order notes or call Customer Support at 310-878-9429.
Is there a minimum order for personalized tumblers?
No. You can order a single tumbler or enough for an entire company. For bulk pricing, please contact [email protected].
How long does it take to get a personalized tumbler?
Standard production is 5 to 10 business days, then 2 to 5 days shipping within the US. Rush production is 3 to 5 business days and expedite is 1 to 3. For a wedding, order 3 to 6 months ahead when you can.
Do you ship personalized tumblers outside the United States?
International shipping is by request. The shopping cart calculates US shipping only and international orders cannot be rushed, so email [email protected] for a quote.
Can I return a personalized tumbler?
Personalized items are made to order and are final sale unless defective. A tumbler ordered without personalization can be returned within 14 days.
See more in Mugs + Water Bottles + Tumblers.
Updated September 2026 by the HansonEllis personalization team.
Average Customer Review: Not yet rated
| |
|
|
Recently Viewed Products |
|
|
Frequently bought together with the Personalized Skid-Proof Double Wall Stainless Steel Tumbler with Thumb-Slide Closure* |
|
|
18oz Engraved Stainless Steel Water Canteen Bottle + Carabiner* $19.95 |
|
|
Engraved Stainless Steel Executive Sedici Tumbler* $16.95 |
|