Executive Leather USB Flash Drive Key Holder*
The Executive Leather USB Flash Drive Key Holder is the kind of desk accessory that earns its place by doing two jobs at once. It is a leather snap open case with a polished metal key holder inside, so the keys sit held and quiet rather than jangling loose in a pocket, and the same piece carries the files that matter.
The leather exterior gives it the weight and the finish of a proper executive accessory. The snap closure means it stays shut when it is dropped into a briefcase, a jacket pocket or a carry-on, and the polished metal key holder inside is the detail people notice when the case is opened across a meeting table.
On the storage side, the drive is built on Tier One Chip Technology and runs at Hi-speed 2.0 with 1 GB of capacity, which is plenty for the documents, presentations and contracts that move between a laptop and a client. No driver is needed for Windows 2000, ME or XP, and drivers for Windows 98 and Windows SE are available, so it works with older office machines as well as newer ones.
A gift box and a 1/4" wide lanyard are included. The lanyard matters more than it sounds: a drive on a lanyard is a drive that hangs from a wrist or a bag strap through an airport, a trade show or a site visit, instead of the one that slides out of a pocket somewhere between the taxi and the terminal.
At 1 1/4"H x 3-3/8"W x 1/2"D it is small enough to live permanently in a jacket pocket and solid enough that it does not feel like a giveaway. That is what makes it work as an executive gift, a thank-you for a client, a welcome item for a new hire, or the accessory a frequent traveller keeps for years because the keys, the files and the leather all arrive in one hand.
Choose your quantity above and give an accessory that leaves the desk every morning and comes back every night.
size: 1 1/4"H x 3-3/8"W x 1/2"D
Executive Leather USB Flash Drive Key Holder at a glance
The Executive Leather USB Flash Drive Key Holder is a leather snap open case with a polished metal key holder and a built-in USB flash drive. It measures 1 1/4"H x 3-3/8"W x 1/2"D. The drive uses Tier One Chip Technology and Hi-speed 2.0 with 1 GB of capacity; no driver is needed for Windows 2000, ME or XP, and drivers for Windows 98 and Windows SE are available. A gift box and a 1/4" wide lanyard are included.
Best for: companies and executives who want one leather accessory that carries the keys and the files, handed over in a gift box rather than a jiffy bag.
Who the Executive Leather USB Flash Drive Key Holder is for
- Corporate and client gifts an executive accessory that a client keeps on the keyring rather than in a drawer.
- Retirement a leather keepsake for the person clearing a desk after a long career.
- Graduation keys, files and a leather case for a first professional job.
- Father's Day for the dad whose keys, badge and documents all travel together.
- Christmas a compact leather gift that fits an office exchange or a stocking.
- Birthdays a practical gift for someone who is impossible to buy for.
- Groomsmen a pocket accessory for the guys that gets used long after the wedding.
- Best friend something useful for the friend who is always losing a drive or a set of keys.
- Housewarming a key holder for a new set of keys and a new front door.
- Anniversaries a quiet leather piece for a partner who works out of a briefcase.
Executive Leather USB Flash Drive Key Holder size and materials
| Size | 1 1/4"H x 3-3/8"W x 1/2"D |
|---|---|
| Material | Leather snap open case with a polished metal key holder |
| What is included | The leather case with its polished metal key holder and USB flash drive, plus a gift box and a 1/4" wide lanyard. |
| Personalization | This listing carries no personalization field, so the case ships as shown. For engraving or logo work on an executive gift, email [email protected]. |
| Turnaround | Standard 5–10 business days, rush 3–5, expedite 1–3, plus 2–5 days US shipping |
| Personalized by | HansonEllis, in-house, in business since 1999 |
Care and use
- The case snaps open and shut, so it stays closed in a pocket or a briefcase.
- A 1/4" wide lanyard is included, so the drive can hang from a wrist or a bag strap instead of travelling loose.
- The drive is Hi-speed 2.0 with 1 GB of capacity; Windows 2000, ME and XP need no driver, and drivers for Windows 98 and Windows SE are available.
How the Executive Leather USB Flash Drive Key Holder is personalized
- Set the quantity you need on this page. There is no minimum order, so you can take one case or one for a whole department.
- For a logo or any custom treatment, email [email protected] with a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image before or after ordering. A logo setup fee applies and not every logo can be reproduced.
- HansonEllis prepares your order in-house and ships it insured by UPS, FedEx or USPS, with tracking emailed to you.
Ways to use it
- A client thank-you loaded with the proposal, the contract and the presentation before it is handed over.
- A new-hire welcome gift, with the onboarding documents already on the drive.
- A conference or trade show gift for the people who actually stay to talk.
- A travel accessory, with the lanyard used to keep the drive on a bag strap through an airport.
- A retirement keepsake for someone whose keys have opened the same building for twenty years.
Which one should I choose
An executive USB gift usually comes down to whether it has to look like a gift or just move a file.
| Executive Leather USB Flash Drive Key Holder | Choose it when the drive has to arrive as a gift, in leather, with a key holder and a lanyard, not as a bare stick. |
|---|---|
| A plain promotional USB stick | Choose that only when the drive is disposable and nobody will keep it, because there is no case, no key holder and no gift box. |
| A separate leather key case | Choose that when the recipient only needs keys organised and has no use for the storage. |
If the gift has to be opened as a gift and used every day afterwards, the leather case with the key holder and the drive built in is the one.
Ordering the Executive Leather USB Flash Drive Key Holder for weddings and events
Ordering the Executive Leather USB Flash Drive Key Holder for a conference, a client programme or a company event is straightforward. There is no minimum order, so take one case or one for every attendee. Company logos are a custom order: email a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected], where a logo setup fee applies and not every logo can be reproduced. Every case includes a gift box and a 1/4" wide lanyard, so no extra packaging is needed for a hand-out. Standard production is 5–10 business days, rush 3–5 and expedite 1–3, plus 2–5 days US shipping, and for a wedding or a dated event order 3–6 months ahead. For bulk pricing, please contact [email protected].
Questions shoppers ask about the Executive Leather USB Flash Drive Key Holder
What is the Executive Leather USB Flash Drive Key Holder?
It is a leather snap open case with a polished metal key holder inside and a USB flash drive built in, so keys and files travel in the same piece.
How big is it?
It measures 1 1/4"H x 3-3/8"W x 1/2"D, small enough to sit in a jacket pocket or a briefcase pouch.
How much storage does the drive hold?
It is a Hi-speed 2.0 drive with 1 GB of capacity, built on Tier One Chip Technology.
Does it need a driver to work?
No driver is needed for Windows 2000, ME or XP. Drivers for Windows 98 and Windows SE are available.
What comes in the box?
The leather case with its polished metal key holder and drive, plus a gift box and a 1/4" wide lanyard.
Can it be personalized with a name?
This listing does not offer a personalization field, so the case ships as shown. If you want engraving on an executive gift, email [email protected] to ask what can be done.
Can a company logo be added?
Logo work is a custom order. Email a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected]. A logo setup fee applies and not every logo can be reproduced.
Is there a minimum order?
No. There is no minimum order, so a single case and a full corporate run are both fine.
Can I see a proof before anything is produced?
Proofs are optional and available on request for a $35-55 service fee per proof, and a proof adds extra days to production. Changes after a proof carry a $40 minimum updating fee.
How long will my order take?
Standard production is 5 to 10 business days, rush 3 to 5, expedite 1 to 3, plus 2 to 5 days US shipping. Orders ship insured by UPS, FedEx or USPS with tracking emailed to you.
Do you ship internationally?
International orders are by request. The cart calculates US shipping only and international orders cannot be rushed, so email [email protected] before ordering.
Can it be returned, and who do I call about a corporate order?
A non-personalized item can be returned within 14 days; anything made to order with custom work is final sale unless defective. For help with a corporate order, call Customer Support on 310-878-9429.
Updated September 2026 by the HansonEllis personalization team.
Average Customer Review: Not yet rated
| |
|
|
Recently Viewed Products |