Jeweled Photo Frame Placecard Holder*
This mini pewter picture frame comes decorated with jewels and holds a 2.5" x 3.5" photo. At 3" x 4" overall, the Jeweled Photo Frame Placecard Holder is scaled for a place setting rather than a mantelpiece. It stands beside a charger and a wine glass without crowding them, and pewter gives it enough weight to stay exactly where you set it, through the toasts, the meal and everything after.
Display each frame with an image of the bride and groom and the room fills with the couple's story: the first holiday together, the proposal, the grandparents on their own wedding day. Guests lean in, point, and start talking to the person beside them before anybody has made an introduction.
Or use it as a place card holder to accent the reception tables. Slide a card with a guest's name into the frame and the seating takes care of itself while you are still greeting people at the door. Every guest walks a row of settings looking for their own name, so the one object on the table that every single person picks up may as well be worth picking up.
The jewels are what make it read from across the room. They catch candlelight and daylight the way the glassware does, so the tables look considered rather than printed, and photographs of the room afterwards show a line of small bright points down the length of every table.
When the meal is over, a folded paper card goes out with the napkins. The frame does not. It travels home in a handbag and turns up on a desk or a shelf with the same photograph still in it, or a new one, which is a better ending for a favor than the recycling bin.
Choose your quantity, one Jeweled Photo Frame Placecard Holder for every seat plus a few spare for the head table and the gift table, and let the tables introduce themselves.
Jeweled Silver Photo Frame
Size: 3" x 4"
Jeweled Photo Frame Placecard Holder at a glance
The Jeweled Photo Frame Placecard Holder is a mini pewter picture frame decorated with jewels, 3" x 4" overall, that holds a 2.5" x 3.5" photo. Display each frame with an image of the bride and groom, or use it as a place card holder to accent the reception tables with a guest's name card in place of a photo. No personalization field is shown on this page, so the wording lives on the card or the photo that the frame holds.
Best for: couples and hosts who want one object at each reception seat that works as the place card during dinner and goes home afterwards as a photo frame.
Who the Jeweled Photo Frame Placecard Holder is for
- Weddings one frame at every seat, holding a guest's name at dinner and a picture of the bride and groom afterwards.
- Anniversaries a seated dinner where each place is marked and the couple's own photographs line the table.
- Bridesmaids and groomsmen a small thank-you at each attendant's place with a photo of the group already inside.
- Birthdays a milestone dinner laid properly, with every guest finding their own name without being shown to it.
- Baby showers a frame at each setting that goes home ready for the first picture of the new arrival.
- Mother's Day a family lunch where every place is set and every mother leaves with a frame.
- Christmas a holiday table where the jewels sit between the candles and each guest still finds their seat.
- Valentine's Day a table for two, or a dinner for couples, with a photograph in the frame instead of a name.
- Retirement a farewell dinner where the frames carry pictures from across a whole career.
- Corporate and client dinners a seated evening for clients where the place setting should look considered rather than printed.
Jeweled Photo Frame Placecard Holder size and materials
| Size | 3" x 4" |
|---|---|
| Material | Mini pewter picture frame, decorated with jewels, in silver |
| What is included | One mini pewter picture frame decorated with jewels, sized to hold a 2.5" x 3.5" photo |
| Personalization | No personalization field is shown on this page. The photograph or the guest's name goes inside the frame, on a 2.5" x 3.5" photo or a name card cut to fit. For questions about printed cards or personalization, email [email protected] before ordering |
| Turnaround | Standard 5–10 business days, rush 3–5, expedite 1–3, plus 2–5 days US shipping |
| Personalized by | HansonEllis, in-house, in business since 1999 |
Care and use
- The frame is mini pewter, decorated with jewels, so handle and store it as you would the other small metalware on the table.
- It takes a 2.5" x 3.5" photo, so trim any picture or name card to that size before it goes in.
How the Jeweled Photo Frame Placecard Holder is personalized
- Count one Jeweled Photo Frame Placecard Holder for every seat, plus a few spare for the head table, the gift table and late guest changes.
- Decide what goes in the frame: a 2.5" x 3.5" photo of the bride and groom, or a card with each guest's name for the reception tables.
- Set your quantity and order. HansonEllis ships your order insured by UPS, FedEx or USPS, with tracking emailed to you.
Ways to use the jeweled photo frames
- One at every setting with the guest's name inside, so the room seats itself while you greet people at the door.
- The same frames filled with photographs of the bride and groom, one for each year they have known each other, down the length of the table.
- On an escort card table by the entrance, each frame holding a name and a table number.
- As table markers on a long table, with the table name or number in the frame instead of a stand.
- Sent home as the favor, with the photograph still inside for a desk, a shelf or a hallway.
Which one should I choose
Most hosts are choosing between something that marks the seat and something that also leaves with the guest. Here is how the Jeweled Photo Frame Placecard Holder compares.
| Jeweled Photo Frame Placecard Holder | Choose it when you want one 3" x 4" pewter piece to hold the name card at dinner and a 2.5" x 3.5" photo of the bride and groom afterwards. |
|---|---|
| Folded paper tent cards | Choose them only when the seating plan has to be printed at the last minute; they lie flat, add nothing to the setting and go out with the napkins. |
| A plain wire or metal card holder | Choose it for a formal room with no theme at all; it holds a card neatly, but nobody takes it home. |
Of the three, the jeweled pewter frame is the only one that seats the room, decorates the table and then leaves with the guest.
Ordering the Jeweled Photo Frame Placecard Holder for weddings and events
Ordering the Jeweled Photo Frame Placecard Holder for a wedding, a party or a company dinner is straightforward. There is no minimum, so count one frame per seat and add a few spares for the head table, the gift table and late guest changes. If each frame should carry a different guest's name, order your full quantity and email the list to [email protected] after ordering. A company logo is a custom order: send a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to the same address, allowing for a logo setup fee, and note that not every logo can be done. Standard production is 5–10 business days, rush 3–5 and expedite 1–3, plus 2–5 days US shipping; for a wedding, order 3–6 months ahead. For bulk pricing, please contact [email protected].
Questions shoppers ask about the Jeweled Photo Frame Placecard Holder
How big is the Jeweled Photo Frame Placecard Holder?
The frame measures 3" x 4" overall and holds a 2.5" x 3.5" photo. That is place-setting scale, small enough to stand beside a charger and a wine glass.
What is the frame made of?
It is a mini pewter picture frame, decorated with jewels.
What size photo fits inside?
It holds a 2.5" x 3.5" photo. A name card cut to the same size sits in the frame just as well.
Does a photo or a place card come with it?
The frame is sized for a 2.5" x 3.5" photo. The current product information does not list a photo or a place card as part of the item, so email [email protected] if you want that confirmed before ordering.
Can the frame itself be personalized?
No personalization field is shown on this page, so the wording lives on the card or photograph inside the frame rather than on the pewter. Email [email protected] if you have a personalization question.
Can it be used as a place card holder?
Yes. That is one of the two uses it is made for: display each frame with an image of the bride and groom, or use it as a place card holder to accent the reception tables.
How many should I order for a wedding?
One for every seat, plus a handful of spares for the head table, the gift table and last-minute guest changes. There is no minimum, so you can order the exact count you need.
Is there a minimum order?
No. Order a single frame or one for every chair in the room. For bulk pricing, please contact [email protected].
Can I have a different name on each one?
Yes, by way of the card each frame holds. If you want names printed, order your full quantity and email your list to [email protected] after ordering so it can be matched to your order.
Can a company logo be used with these?
Logo work is handled as a custom order. Email a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected]; a logo setup fee applies and not every logo can be done.
Can I see a proof first?
Proofs are optional and available on request for a $35-55 service fee per proof, and a proof adds extra days to production. Changes after a proof has been sent carry a $40 minimum updating fee. Customer Support is on 310-878-9429.
How long will my order take, and do you ship internationally?
Standard production is 5–10 business days, rush 3–5 and expedite 1–3, plus 2–5 days shipping within the US. For a wedding, order 3–6 months ahead. International shipping is by request and cannot be rushed, so email [email protected] for a quote.
Updated September 2026 by the HansonEllis personalization team.
Average Customer Review: Not yet rated
| |
|
|
Recently Viewed Products |