Office Desktop Jade Glass Nameplate with Aluminum Pole Holders
This jade glass/aluminum combo nameplate is a perfect item to display someone's name and title or even company logo. The aluminum poles and beveled plaque make a very classy presentation, and the Office Desktop Jade Glass Nameplate with Aluminum Pole Holders earns its place the way a good pen does: it is the small object people notice while they are waiting to sit down.
Jade glass carries a soft green cast in its edges that printed plastic never manages, and the bevel picks up whatever light is in the room, so the plate reads as a piece of glass rather than a strip of lettering. The two aluminum poles lift it clear of the desktop, so the name floats above the paperwork instead of lying in it. At 11 inches across it spans the front edge of a desk or a reception counter and stays readable from standing height, which is exactly where a visitor is standing when they need it.
HansonEllis engraves it in-house and has been personalizing gifts since 1999. You have two lines of up to 24 characters each, which is room for a full name on the first line and a title, a department or a set of credentials on the second. A company name can take the second line instead, and a company logo can be engraved as a custom order for a firm that wants every desk to match its letterhead.
It is the gift for a promotion, a first office, a corner office, a new practice or a retirement, and it works just as well ordered by the dozen for a whole department, a conference room, a clinic corridor or a bank of reception desks. Hand it over on the day someone's title changes and it does the announcing for them, quietly, every day after that.
Add your engraving text above, choose your quantity, and give a desk the nameplate it deserves.
Office Desktop Jade Glass Nameplate with Aluminum Pole Holders
Size Approximately 3-3/8" x 11" x 3"
Jade Glass
Item# pri-streg
Office Desktop Jade Glass Nameplate with Aluminum Pole Holders at a glance
The Office Desktop Jade Glass Nameplate with Aluminum Pole Holders is a desktop nameplate measuring approximately 3-3/8" x 11" x 3", built from a beveled jade glass plaque held upright by two aluminum pole holders. HansonEllis engraves it in-house with up to two lines of 24 characters, so a name sits on one line and a title, department or company on the other. A company logo can be engraved as a custom order. It suits an office desk, a reception counter or a conference room.
Best for: offices, practices and reception desks that want a name and title read clearly from standing height, engraved into jade glass rather than printed onto plastic.
Who the Office Desktop Jade Glass Nameplate with Aluminum Pole Holders is for
- Corporate and client gifts a desk piece with the client's name and title engraved in jade glass, seen by everyone who visits their office.
- Promotions and new titles the new title cut into the second line, handed over on the day it becomes official.
- Retirement a name and the years of service on a plaque that leaves the building with them.
- New office and housewarming for a first practice, studio or home office where the desk is still bare.
- Work anniversaries a milestone year engraved under the name instead of another certificate for the drawer.
- Graduation for the new graduate taking a first desk, with the credentials they just earned on the second line.
- Father's Day for the dad whose office still identifies him with a strip of printed plastic.
- Mother's Day for the mother running her own practice or company, with the business name on the plate.
- Birthdays a desk gift for the colleague or friend who notices materials and keeps their workspace deliberate.
- Christmas an office gift that suits anyone on the team, from the front counter to the corner office.
Office Desktop Jade Glass Nameplate with Aluminum Pole Holders size and materials
| Size | Approximately 3-3/8" x 11" x 3" |
|---|---|
| Material | Jade glass plaque with a beveled edge, held by aluminum pole holders |
| What is included | One nameplate: the beveled jade glass plaque and its two aluminum pole holders |
| Personalization | Engraved in-house, up to two lines of 24 characters each; a company logo can be engraved as a custom order |
| Turnaround | Standard 5–10 business days, rush 3–5, expedite 1–3, plus 2–5 days US shipping |
| Personalized by | HansonEllis, in-house, in business since 1999 |
Care and use
- The beveled jade glass plaque sits in two aluminum pole holders, which lift the name clear of the desktop.
- At approximately 3-3/8" x 11" x 3" it is a desktop piece, sized to span the front edge of a desk or a reception counter.
How the Office Desktop Jade Glass Nameplate with Aluminum Pole Holders is personalized
- Type the name and title exactly as you want them engraved into the personalization field on this page, keeping each of the two lines to 24 characters or fewer, spaces and punctuation included.
- Set your quantity. Order one nameplate or one for every desk in the department, and if each plate carries a different name, email your list to [email protected] after ordering.
- HansonEllis engraves the jade glass in-house and ships the nameplate insured by UPS, FedEx or USPS, with tracking emailed to you.
Ideas for what to engrave on the nameplate
- A full name on the first line and the job title on the second.
- A name with credentials after it for a clinic, a practice or a law office.
- A company or department name where a title is not needed.
- A name on the top line and the company on the bottom for a reception counter.
- A retirement plate with the name on one line and the years of service on the other.
Quote ideas for your Office Desktop Jade Glass Nameplate with Aluminum Pole Holders
- Dr. Amelia Reyes
- Marcus Webb, Principal
- Priya Shah, Chief Counsel
- Director of Operations
- Congratulations, Captain
- Sierra Realty Group
- Thank You for 25 Years
- Coach Daniel Okafor
- Welcome to the Team, Ana
- Elena Novak, MD Cardiology
Which one should I choose
Every desk nameplate does the same job. The difference is what the plate is made of and how long it keeps looking deliberate.
| Office Desktop Jade Glass Nameplate with Aluminum Pole Holders | Choose it when the desk should look considered: a beveled jade glass plaque lifted on aluminum poles, engraved with a name and title. |
|---|---|
| A printed plastic desk nameplate | Choose it when the plate is temporary and nobody will look twice, since the lettering sits on the surface rather than being cut into glass. |
| A paper or card tent sign | Choose it for a one-day conference table, not for a desk somebody sits at every week. |
For a permanent desk, a reception counter or a gift marking a new title, the jade glass and aluminum version is the one that still looks right a year later.
Ordering the Office Desktop Jade Glass Nameplate with Aluminum Pole Holders for weddings and events
Ordering the Office Desktop Jade Glass Nameplate with Aluminum Pole Holders for a whole office is straightforward. There is no minimum, so order one plate or one for every desk. If each nameplate carries a different name and title, order the full quantity and email your list to [email protected] after ordering so it can be matched to your order. Company logos are a custom order: send a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected], where a logo setup fee applies and not every logo can be engraved. Standard production is 5–10 business days, rush 3–5 and expedite 1–3, plus 2–5 days US shipping, so plan backward from your opening or awards date. For bulk pricing, please contact [email protected].
Questions shoppers ask about the Office Desktop Jade Glass Nameplate with Aluminum Pole Holders
How big is the Office Desktop Jade Glass Nameplate with Aluminum Pole Holders?
It measures approximately 3-3/8" x 11" x 3". The 11 inch width spans the front edge of a desk or a reception counter and keeps the name readable from standing height.
What is the nameplate made of?
Jade glass and aluminum. The beveled jade glass plaque sits in two aluminum pole holders, which is what gives it the classy presentation rather than the look of a printed strip.
How is the nameplate personalized?
It is engraved in-house by HansonEllis. Type your wording into the personalization field on this page and it is cut into the jade glass plaque.
How many characters fit on the nameplate?
Two lines of up to 24 characters each, 48 characters in total, counting spaces and punctuation. Most people use a full name on line one and a title on line two.
Can I have a company logo engraved on it?
Yes, by custom order. Email your logo as a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected]. A logo setup fee applies and not every logo can be engraved.
Can each nameplate have a different name for a whole office?
Yes. Order the full quantity you need, then email your list of names and titles to [email protected] after ordering so it can be matched to your order.
Can I see a proof before the glass is engraved?
Yes. Proofs are optional and available on request for a $35-55 service fee per proof, and a proof adds extra days to production. Changes after a proof has been sent carry a $40 minimum updating fee, so check spelling and titles before you order.
Is there a minimum order?
No. Order a single nameplate or one for every desk in the building. For bulk pricing, please contact [email protected].
How long does it take to get an engraved nameplate?
Standard production is 5 to 10 business days plus 2 to 5 days US shipping. Rush production takes 3 to 5 days and expedite production 1 to 3 days.
How does the nameplate ship?
Orders ship insured by UPS, FedEx or USPS, and tracking is emailed to you.
Do you ship the nameplate internationally?
International shipping is by request. The cart calculates US shipping only and international orders cannot be rushed, so email [email protected] for a quote.
Can I return an engraved nameplate?
Personalized items are made to order and are final sale unless defective. An unpersonalized nameplate can be returned within 14 days. For help before you order, Customer Support is on 310-878-9429.
See more in GIFTS + HOME.
Updated September 2026 by the HansonEllis personalization team.
Average Customer Review: Not yet rated
| |
|
|
Recently Viewed Products |