Champagne Wedding Bride and Groom Flute Glass Decorations*
The perfect accent to any toast, our Champagne Wedding Bride and Groom Flute Glass Decorations provide a little extra emphasis for your special day. Packaged as a set of two, with one bride and one groom decoration, these accents slip easily onto any flute glass and stay secure with gentle elastic.
The toast is one of the few moments at a reception when the whole room is looking at the same two hands. Everything else is movement, conversation and plates arriving; then the glasses go up, the room goes quiet, and the photographer takes the shot that ends up framed. These decorations are for that thirty seconds. They tell the room instantly which glass belongs to the bride and which to the groom, and they give the photograph something to focus on besides two identical stems.
At 2" to 2.5" in diameter they are scaled for a flute rather than a tumbler, big enough to read across a room and small enough that nobody is holding a prop. The gentle elastic is what makes them practical: they go on in seconds without glue, tape or ribbon-tying, they hold their place while a glass is lifted and set down through a long evening, and they come off again just as easily when the toast is over.
Because they are not fixed to the glass, they travel. Use them on rented reception flutes, on the pair you bought for the ceremony, or on the champagne glasses at the engagement party months before the wedding itself. Then keep going: an anniversary dinner at home, a vow renewal, a milestone birthday toast for a couple who have been together long enough to deserve one.
Perfect to remind your guests of their own special day, or inspire others to tie the knot, these favors can be given away as a keepsake after the wedding to remind your guests of the memories they shared with you.
Choose your quantity above, one set for the head table or a set for every couple in the room, and give the toast something to look at.
Champagne Wedding Bride and Groom Flute Glass Decorations
Size: 2"-2.5" Diameter
Champagne Wedding Bride and Groom Flute Glass Decorations at a glance
The Champagne Wedding Bride and Groom Flute Glass Decorations come packaged as a set of two, one bride decoration and one groom decoration, each 2" to 2.5" in diameter. They slip easily onto any flute glass and stay secure with gentle elastic, so they sit on the toasting flutes without being glued or tied in place. After the wedding they can be given away as a keepsake, a small reminder of the day for the guests who shared it with you.
Best for: couples who want the toasting flutes at the head table to read as bride and groom in every photograph, without gluing anything to the glass.
Who the Champagne Wedding Bride and Groom Flute Glass Decorations is for
- Weddings the head table toasting flutes, marked bride and groom so the photograph reads at a glance.
- Engagement parties a first toast months before the wedding, using the same pair of decorations you will use again on the day.
- Bridesmaids and groomsmen a set at the rehearsal dinner for the couple, set out by the wedding party as a small surprise.
- Anniversaries a dinner at home where two ordinary flutes become bride and groom again for one evening.
- Best friend celebrations a gift for the friend who just got engaged, ready for whichever toast comes first.
- Bridal showers a decorated pair of glasses for the guest of honour at the centre of the table.
- Birthdays a milestone birthday toast for a couple, or a joint celebration where two glasses need telling apart.
- Valentine's Day a table for two at home, dressed for the occasion in about five seconds.
- Beach and destination weddings light and easy to pack, with nothing to glue on once you arrive.
- Corporate and client events a couples' table at a gala or an awards dinner, marked for a presentation or an announcement.
Champagne Wedding Bride and Groom Flute Glass Decorations size and materials
| Size | 2"-2.5" Diameter |
|---|---|
| Material | Not stated on this listing; the decorations are secured with gentle elastic. |
| What is included | A set of two decorations, one bride and one groom. Flute glasses are not included. |
| Personalization | No personalization field is shown on this page and no text personalization is offered for this item. Email [email protected] if you need something added. |
| Turnaround | Standard 5–10 business days, rush 3–5, expedite 1–3, plus 2–5 days US shipping |
| Personalized by | HansonEllis, in-house, in business since 1999 |
Care and use
- The decorations stay secure with gentle elastic, so ease them on and off the glass rather than pulling, and store them flat between uses.
- They are sized for a flute glass at 2" to 2.5" in diameter, so check the rim and bowl of a wider glass before the day.
How the Champagne Wedding Bride and Groom Flute Glass Decorations is personalized
- Choose your quantity: one set of two for the head table, or a set per couple if you are using them around the room.
- Slip each decoration onto a flute glass; the gentle elastic holds it in place and comes off again after the toast.
- HansonEllis ships your sets insured by UPS, FedEx or USPS with tracking emailed to you, in time for the rehearsal.
Ways to use the flute glass decorations
- On the couple's toasting flutes at the head table, so the photographs show which glass is whose.
- On two glasses at the engagement party, then used again at the wedding itself.
- As part of a sweetheart table setting, alongside the cake knife and the guest book.
- Given away as a keepsake after the reception, so a guest takes home a reminder of the toast.
- Kept for the anniversary, brought out each year on the same date with two glasses at home.
Which one should I choose
Toasting glasses can be bought as a matched pair, dressed with something removable, or left plain.
| Champagne Wedding Bride and Groom Flute Glass Decorations | Choose them when the glasses are rented or already owned and you want the bride and groom look without buying new flutes. |
|---|---|
| A dedicated pair of bride and groom toasting flutes | Choose them when you want the glasses themselves to be the keepsake and you are happy to buy the pair. |
| Ribbon or charms tied to the stem | Choose that when you are decorating by hand and do not mind tying, trimming and re-tying on the day. |
If the flutes are already sorted and only the last touch is missing, the slip-on decorations get you there in seconds and come off again afterwards.
Ordering the Champagne Wedding Bride and Groom Flute Glass Decorations for weddings and events
For a wedding, one set of two Champagne Wedding Bride and Groom Flute Glass Decorations covers the head table, while a set per couple lets you dress every table in the room. There is no minimum order, so both work; if the set is going out as a favor, count one per couple rather than one per guest. The decorations carry no text, so nothing varies from set to set. A logo for a corporate event is a custom order, sent as a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected], where a logo setup fee applies. Standard production is 5–10 business days, rush 3–5 and expedite 1–3, plus 2–5 days US shipping; for weddings order 3–6 months ahead. For bulk pricing, please contact [email protected].
Questions shoppers ask about the Champagne Wedding Bride and Groom Flute Glass Decorations
How big are the flute glass decorations?
They are 2" to 2.5" in diameter, scaled for a champagne flute rather than a wine glass or a tumbler.
How many come in a set?
They are packaged as a set of two, with one bride decoration and one groom decoration.
Do they fit any flute glass?
They slip easily onto any flute glass and stay secure with gentle elastic, so they are not tied to one particular glass shape.
Do they stay on while the glass is being used?
They stay secure with gentle elastic, which holds them in place as the glass is lifted and set down through the evening.
Are the glasses included?
No. The set is the two decorations; the flute glasses themselves are not included.
Can they be personalized with our names or date?
No text personalization field is shown for this item. If you need wording added, email [email protected] and they will tell you what is possible.
Can we give them to guests afterwards?
Yes. They can be given away as a keepsake after the wedding, to remind your guests of the memories they shared with you.
Can I use them for something other than a wedding?
Yes. They suit an engagement party, a bridal shower, a vow renewal or an anniversary toast just as well, anywhere two glasses need telling apart.
Is there a minimum order?
No. There is no minimum order, so a single set for the head table is fine. For bulk pricing, please contact [email protected].
How long do they take to arrive?
Standard production is 5 to 10 business days plus 2 to 5 days US shipping, with rush (3 to 5 business days) and expedite (1 to 3 business days) available.
Can you ship them internationally?
International shipping is available by request. The cart calculates US shipping only and there is no rush service on international orders, so email [email protected] for a quote.
Can I return them?
Items without personalization can be returned within 14 days. Customer Support is at 310-878-9429 if you need to arrange it.
See more in Reception + Ceremony.
Updated September 2026 by the HansonEllis personalization team.
Average Customer Review: Not yet rated
| |
|
|
Recently Viewed Products |
|
|
Frequently bought together with the Champagne Wedding Bride and Groom Flute Glass Decorations* |
|
|
Champagne Wedding Bride and Groom Wine Bottle Decorations* $9.95 |
|
|
Hand Painted Classic Bride & Groom Porcelain Cake Topper* $59.97 |
|