Adirondack Beach Chair Placecard Holder*
Decorate your nautical or beach theme event with these adirondack chairs.
Add a personal touch to your beach theme event with these fun and adorable Adirondack Beach Chair Placecard Holders. Use them as wedding favors, cake toppers, or as an accessory to decorate your tables. The chairs come in a traditional white finish and can be personalized with the bride and groom's names and event date.
A place card holder is one of the few decorations a guest actually picks up. Everyone walks the table looking for their own name, and with these they find a miniature white Adirondack chair, the kind that sits on a porch facing the water, with their card slotted into the back of it. It is the smallest possible way to say the whole weekend is about sand and slow afternoons, and it works before a single speech has been made.
At 3-1/8"L x 2-1/4"W x 3-1/4"H each chair is scaled for a place setting. It sits beside a charger without crowding a glass, it holds a card upright so the name reads from standing height, and it photographs beautifully in a table shot because the white finish catches the light against linen, driftwood or bare wood.
When dinner is over, the chairs do not go in the bin like paper cards do. Guests take them home, and they end up on a desk holding a photograph, on a kitchen shelf holding a recipe card, or back on a table the next summer holding a name again. That is the difference between decorating a table and giving a favor, and this small white chair does both jobs at once.
They are just as good away from a wedding. Stand a pair on top of the cake as a beach-themed cake topper, run them down a rehearsal dinner table, set them out at a bridal shower brunch, or use them at a retirement party for someone who is finally getting their afternoons back.
For more reception ideas, shop our collection of unique Beach Wedding Favors.
Choose your quantity, one chair for every seat, and let your guests find their own name waiting on the sand.
Adirondack Beach Chair Placecard Holder
Size: 3-1/8"L x 2-1/4"W x 3-1/4"H
Adirondack Beach Chair Placecard Holder at a glance
The Adirondack Beach Chair Placecard Holder is a miniature Adirondack chair in a traditional white finish, 3-1/8"L x 2-1/4"W x 3-1/4"H, that holds a guest's place card upright at a table setting. It doubles as a beach theme wedding favor, a cake topper or a table decoration, and the description notes it can be personalized with the bride and groom's names and event date. Sold individually, so you can order one chair per seat.
Best for: couples and hosts planning a beach, seaside or destination event who want the seating plan and the favor to be the same small white chair.
Who the Adirondack Beach Chair Placecard Holder is for
- Beach and destination weddings one chair at every place setting, so the table is decorated and the seating is done in one move.
- Weddings and receptions a favor guests take home from the table instead of leaving a folded paper card behind.
- Bridal showers a brunch table where each seat gets a miniature white chair with a name card in it.
- Rehearsal dinners a smaller, easier table to decorate, with the same beach theme as the wedding day.
- Anniversaries a seaside anniversary dinner with the couple's names and the date on the cards.
- Birthdays a summer birthday party table, or a milestone birthday held by the water.
- Baby showers name cards for a beach or nautical shower, kept afterwards on a nursery shelf.
- Retirement parties for someone finally getting their porch afternoons back, with a chair at every seat.
- Housewarming and summer parties a set on the table for a beach house dinner, reused every summer.
- Corporate and client events a themed seating plan for a resort dinner or an offsite by the water.
Adirondack Beach Chair Placecard Holder size and materials
| Size | 3-1/8"L x 2-1/4"W x 3-1/4"H |
|---|---|
| Material | Wood, in a traditional white finish |
| What is included | One miniature Adirondack beach chair place card holder in a traditional white finish; place cards are not listed as included |
| Personalization | The description offers personalization with the bride and groom's names and event date. No personalization field is shown on this page, so email [email protected] with your wording and quantity before ordering |
| Turnaround | Standard 5–10 business days, rush 3–5, expedite 1–3, plus 2–5 days US shipping |
| Personalized by | HansonEllis, in-house, in business since 1999 |
Care and use
- The chairs come in a traditional white finish, so keep them off damp table linen and out of standing water when a table is set outdoors.
How the Adirondack Beach Chair Placecard Holder is personalized
- Count one Adirondack Beach Chair Placecard Holder for every seat, plus a few spares for a head table or a cake display.
- If you want the bride and groom's names and event date added, email your wording to [email protected] before or just after ordering, as no personalization field is shown on this page.
- HansonEllis ships your chairs insured by UPS, FedEx or USPS with tracking emailed to you, in time to set the tables.
Ways to use the beach chair place card holders
- One at every place setting, holding a card with the guest's name and table number.
- A pair on top of the cake as a beach theme cake topper for the bride and groom.
- Down the centre of a long table between shells and candles, as decoration rather than seating.
- At the escort card table by the entrance, so guests collect a chair on the way in.
- Sent home on a desk or a kitchen shelf afterwards, holding a photograph or a recipe card.
Which one should I choose
At a beach table the choice is between a card that lies flat, a card that stands in a holder, and a favor that also does the seating.
| Adirondack Beach Chair Placecard Holder | Choose it when you want the seating plan to be part of the decoration and to leave with the guest afterwards. |
|---|---|
| A printed folded place card | Choose it when the budget and the table are simple and nothing needs to go home with anyone. |
| A separate beach wedding favor at each seat | Choose it when you are already giving a favor and the place cards only have to name the guest. |
If you want one thing on the table to do two jobs, the Adirondack Beach Chair Placecard Holder is the pick, because it names the seat and then goes home as the favor.
Ordering the Adirondack Beach Chair Placecard Holder for weddings and events
For a wedding or a party, count one Adirondack Beach Chair Placecard Holder for every seat, plus spares for the head table, the escort card table and a cake display. There is no minimum order, so a table of ten and a room of two hundred both work. Different names go on the cards the chairs hold, so a full seating plan needs no special handling; if you want wording added to the chairs themselves, email your list to [email protected] after ordering. Logo orders are a custom order: send a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected], where a logo setup fee applies. Standard production is 5–10 business days, rush 3–5 and expedite 1–3, plus 2–5 days US shipping; for weddings order 3–6 months ahead. For bulk pricing, please contact [email protected].
Questions shoppers ask about the Adirondack Beach Chair Placecard Holder
How big is the Adirondack Beach Chair Placecard Holder?
It measures 3-1/8"L x 2-1/4"W x 3-1/4"H, small enough to sit at a place setting beside a charger and a glass.
What colour are the chairs?
They come in a traditional white finish, which is the classic Adirondack look and sits well on linen, driftwood or bare wood tables.
What is the chair made of?
It is a wood beach chair place card holder in a traditional white finish.
Do the place cards come with it?
The cards themselves are not listed as included. The chair is the holder that stands your card upright at each setting.
Can they be personalized?
The description says the chairs can be personalized with the bride and groom's names and event date. There is no personalization field shown on this page, so email [email protected] with your wording and quantity to arrange it.
Can I use them as a cake topper?
Yes. A pair of chairs on top of the cake is one of the uses listed for them, alongside wedding favors and table decoration.
Is there a minimum order?
No. There is no minimum order, so you can order the exact number of seats you are setting. For bulk pricing, please contact [email protected].
Can each chair carry a different guest name?
The name usually goes on the card the chair holds, so different names per seat are straightforward. If you want different wording added to the chairs themselves, email your list to [email protected] after ordering.
Can I have a company logo on them?
Logos are handled as a custom order. Email a vector file (.eps, .ai, .cdr, .pdf or .svg) or a high-resolution image to [email protected]; a logo setup fee applies and not every logo can be reproduced at this size.
Can I see a proof first?
Proofs are optional and available on request for a $35-55 service fee per proof, and a proof adds extra days to production. Changes after a proof has been sent carry a $40 minimum updating fee. Customer Support is at 310-878-9429.
How far ahead should I order for a wedding?
Standard production is 5 to 10 business days plus 2 to 5 days US shipping, with rush (3 to 5 days) and expedite (1 to 3 days) available, but for a wedding order 3 to 6 months ahead when you can.
Can I return them?
Personalized orders are made to order and final sale unless defective. Chairs ordered without personalization can be returned within 14 days.
Updated September 2026 by the HansonEllis personalization team.
Average Customer Review: Not yet rated
| |
|
|
Recently Viewed Products |